DASCOM Americas 2610 Návod k obsluze Strana 34

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 129
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 33
Tally Dascom 2610
21
Detailed descriptions of the above functions:
Speed
If LQ font is currently set in the configuration, lighting up of theSpeedLED forces NLQ font
printouts; turning offSpeedindicates LQ printouts.
If Draft is currently set in the configuration, lighting up of theSpeedLED forces HS Draft printouts;
turning offSpeedindicates Draft printouts.
Setup Menu
See Chapter 5 for details.
Clear Buffer and Reset
The printer has high capacity storage (buffer) to store the data from the host computer. Sometimes it is
required to halt the printing to clear a fault. Resuming the printing at this point may cause erratic
printouts because some of the un-processed data in the buffer may be truncated. Therefore, it is
recommended clearing the buffer after the recovery with following procedures: (Turning off the printer
is an alternative)
1) Terminate the print job in the host.
2) Press theOnlinekey to bring the printer off-line. The printing will stop, but un-processed data
still resides in the buffer.
3) HoldOnlineand Load/Ejectkeys simultaneously. The buffer will be cleared and the printer
will automatically warm boot.
4) Probably you need to repeat step 2-3 times as the print job in the host spooler may be very large.
Zobrazit stránku 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 128 129

Komentáře k této Příručce

Žádné komentáře